field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!SENIOR COMPONENT MANUFACTURING &amp; TEST ENGINEER&nbsp;Based out of Rocket Lab's headquarters in Long Beach, CA the Senior Component Manufacturing and Test Engineeris responsible for bringing fluid component designs into the real world and assuring they meet the stringent requirements needed for the Neutron program. You will support the Director of Fluid Systems and Fluid Systems organization by standing up a new component development area, supporting component designs early and leading assembly and testing of Neutron components.WHAT YOU’LL GET TO DO:<ul><li>Influence the design of critical Neutron components early in the program to aid in producibility, cost and reliability</li><li>Oversee introduction and implementation of new products and product revisions</li><li>When required, lead problem containment and root cause/corrective action investigations</li><li>Quickly analyze and resolve manufacturing discrepancies and non-conformances</li><li>Collaborate with the quality team to identify and drive quality-related initiatives and improvements</li><li>Liaison between production, quality, supply chain and design engineering staff for complex problem solving and process changes</li><li>Lead the continuous improvement process via Lean/Six Sigma tools and techniques</li><li>Develop, introduce, and maintain new planning, production, quality, ERP, data collection and analysis, and other processes where none exist</li></ul>QUALIFICATIONS YOU’LL BRING AS A SENIOR COMPONENT MANUFACTURING &amp; TEST ENGINEER&nbsp;<ul><li>Bachelor's degree in mechanical, manufacturing, or aerospace engineering</li><li>5+ years of experience troubleshooting valves, actuators, regulators or similar fluid components during assembly, functional checkouts or qualification testing</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;<ul><li>Previous history of planning, building, activating &amp; operating component test stands for development, qualification and production acceptance testing</li><li>Strong knowledge of manufacturing processes common to fluid components</li><li>Experience with assembly &amp; testing of turbomachinery and combustion devices</li><li>Extensive experience using fundamentals of fluid and structural mechanics to solve component issues in a fast-paced environment</li></ul>ADDITIONAL REQUIREMENTS:&nbsp;<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.&nbsp;&nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$85,000—$135,000 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Senior Component Manufacturing & Test Engineer

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT MANUFACTURING AT ROCKET LAB:Rocket Lab’s Manufacturing team are the builders and the doers who work with our advanced machinery across our global manufacturing sites to get our satellites, satellite components, and rockets out the door. They bring the designs of our engineers to life by using advanced manufacturing techniques like 3D printing to create our hardware, and are responsible for delivering our projects and missions on time and on budget to our customers.&nbsp;&nbsp;WHAT YOU'LL GET TO DO:The Composite Manufacturing Engineer enables the production team to achieve the required production rates with the right quality. &nbsp;They are responsible for supporting all aspects of composite production at Rocket Lab. This is delivered by taking ownership of products released to production, removing production blockers, dispositioning non-conformance tickets, performing root-cause analysis, and implementing corrective actions.&nbsp;This role is also responsible for the development, implementation, and continuous improvement of manufacturing processes and procedures relating to composite materials, leveraging their strong working knowledge of both the product and best-practice manufacturing techniques. &nbsp;Manufacturing Engineers are also expected to work with the production team to develop manufacturing best practices, optimising processes for production, and implementing new processes through prototyping, test, and integration. The role will also work closely with other Engineers, Technicians, and subject matter experts across a range of departments. The primary purpose of the Manufacturing Engineer is to support production activities within a high-growth production environment, ensuring manufacturing principles are practised to a high standard and ensuring stringent launch times can be achieved. This position will support the Composites Production and Manufacturing Engineering teams with their deliverables.&nbsp;Regular activities of the manufacturing engineering team can be summed up as practical problem solving over a wide variety of systems and situations, so the ability to remain flexible while applying sound, risk-based engineering decision making is critical.&nbsp;Note: The role requires a background in composite design or manufacturing environmentsYOU'LL BRING THESE QUALIFICATIONS:<ul><li>Bachelor’s degree or equivalent in Mechanical Engineering, Mechatronics Engineering, or related&nbsp;</li><li>Experience working as a Manufacturing / Production / Process / Quality Engineer or equivalent&nbsp;</li><li>Hands-on technical experience debugging complex systems within a manufacturing environment&nbsp;</li><li>Working experience with composite materials manufacturing and design techniques including prepreg and wet layup processes</li><li>Able to prioritize risk effectively and make risk/reward trade-off calls by leveraging engineering and production input to mitigate risk to both rocket and business&nbsp;</li><li>Proven ability to deliver with little to no supervision on schedule as an individual or as a member of an integrated team</li><li>Can-do approach and flexibility to thrive around growing teams and processes</li><li>Excellent communication skills, both written and verbal&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Experience with ERP/PLM Systems - Siemens Team Centre / Infor LN&nbsp;</li><li>Computer Aided Design experience, preferably with Siemens NX&nbsp;</li><li>Knowledge of production quality metrics&nbsp;</li><li>Proven delivery of composite mould and tooling materials, design and implementation&nbsp;</li><li>Can quickly analyse and resolve manufacturing discrepancies and non-conformances&nbsp;</li><li>Ability to lead problem containment and root cause/corrective action investigations and preventative action implementation&nbsp;</li><li>Identify and drive quality-related initiatives and improvements&nbsp;</li><li>Execute product improvements, including qualification and implementation activities</li><li>Develop production procedures and processes and ensure they are accurately and clearly documented to allow repeatable and reliable manufacturing</li><li>Knowledge with composite related material properties including resin systems, ablative materials, and sandwich structures</li><li>Experience with composite structure repair techniques and processes&nbsp;</li><li>Experience in manufacturing and assembly of composite structures into larger assemblies.&nbsp;</li><li>Demonstrated experience with DFMEA, PFMEA methodologies, Fault Tree Analysis, Pareto analysis, root cause and corrective action&nbsp;</li><li>Experience transitioning products from prototype to production&nbsp;</li><li>SPC knowledge and experience applying statistical methods to track process capability and performance&nbsp;</li><li>Computer Aided Design experience, preferably with Siemens NX&nbsp;</li></ul>If you meet 50% of the requirements in this job ad – we want to hear from you with a variety of openings currentl - Apply Now!&nbsp;WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Manufacturing Engineer - Composites

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with clean sheet development of a reusable liquid launch vehicle, this is your opportunity!LEAD COMPONENT MANUFACTURING &amp; TEST ENGINEERBased out of Rocket Lab's headquarters in Long Beach, CA the Lead Component Manufacturing and Test Engineer is responsible for bringing fluid component designs into the real world and assuring they meet the stringent requirements needed for the Electron and Neutron programs. You will support the Director of Manufacturing Engineering and Production organization, with deliverables required for internal leadership, board of directors, and investors.WHAT YOU’LL GET TO DO:<ul><li>Create and commission innovative test systems that incorporate mechanical, fluid, and electrical components. These systems will be used to evaluate product performance and reliability</li><li>Oversee introduction and implementation of new products and product revisions</li><li>Own assembly, checkouts and development testing of components</li><li>Provide mentorship and training to team members</li><li>When required, lead problem containment and root cause/corrective action investigations</li><li>Quickly analyze and resolve manufacturing discrepancies and non-conformances</li><li>Collaborate with the quality team to identify and drive quality-related initiatives and improvements</li><li>Perform structured root cause analysis of in-process failures</li><li>Identify, plan and execute capital equipment, machine, and layout upgrades to meet production requirements, including preparation of business cases</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A LEAD COMPONENT MANUFACTURING &amp; TEST ENGINEER:<ul><li>Bachelor’s degree in mechanical engineering, aerospace engineering or other technical field</li><li>5+ years experience troubleshooting valves, actuators, regulators or similar fluid components during assembly, functional checkouts or while undergoing development and qualification testing</li><li>Experience developing and building safe, high pressure, pneumatic, hydrostatic, and cryogenic test stands</li><li>Experience with instrumentation, controls, and data acquisition systems</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>4+ years' experience with aerospace component design, build &amp; testing</li><li>Experience successfully leading a team through a challenging technical project or program</li><li>Previous history of planning, building, activating &amp; operating component test stands for development, qualification and production acceptance testing</li><li>Extensive experience using fundamentals of fluid and structural mechanics to solve component issues in a fast-paced environment</li><li>Experience with LabVIEW, Python, C, C++, MATLAB</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.&nbsp;&nbsp;&nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.&nbsp;&nbsp;</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise.&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$95,000—$155,000 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Lead Component Manufacturing & Test Engineer

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT ROCKET LAB Rocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. Join our pioneering team and launch your career to new heights! ABOUT ENGINEERING AT ROCKET LAB: Engineering is at the heart of Rocket Lab. Our engineering team has a proven track record of designing and developing world-class rockets and spacecraft that are changing the way we access and use space. You'll work alongside driven, talented engineers from varied backgrounds and experience levels, all committed to the same mission. Our engineering team members span design, analysis, prototyping, testing, manufacturing, assembly and integration, quality control, engineering documentation, and more.WHAT YOU'LL GET TO DO: As an Avionics Manufacturing Engineer based at Rocket Lab's site in Auckland, you will have the opportunity to support the production team to achieve the required production rates with the right quality. In this role you will help develop improvements to the production process within a high-growth, high-consequence production environment. To be successful in this role, you will take ownership of production lines, remove production blockers, understand vehicle risk, and improve manufacturing processes and products to improve build rate and product yield. There are also opportunities to development new products and processes, leveraging your strong working knowledge of best-practice manufacturing through prototyping, test, and integration. Join a driven team that's tackling challenging projects, delivering on exciting missions, and making an impact on the future of space! YOU'LL BRING THESE QUALIFICATIONS:<ul><li>Bachelor's degree or equivalent in Electrical Engineering, Electronic Engineering, or Mechatronics Engineering</li><li>Experience with electrical hardware systems, PCBA Assemblies, or instrumentation and control systems</li><li>Experience designing and debugging electrical test infrastructure or automated test systems</li><li>Experience developing basic automation or data analysis scripting in Python, C or similar</li><li>Hands-on technical experience debugging complex electrical or software systems within a production environment</li><li>Proven ability to deliver engineering projects with little to no supervision on schedule as an individual or as a member of an integrated team</li><li>Can-do approach and flexibility to thrive around growing teams and processes</li><li>Excellent communication skills, both written and verbal</li><li>Proven risk assessment and risk-based decision-making skills</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Experience with ERP/PLM Systems - Siemens Team Centre / Infor LN</li><li>Knowledge of production quality metrics</li><li>Strong experience in configuration control and configuration management in production systems</li><li>Understanding of instrumentation, interfaces, and sensors including power supplies, accelerometers, thermocouples, RTDs, and pressure sensors</li><li>Working experience with environmental acceptance/production acceptance testing, such as vibration, shock, thermal, and vacuum</li><li>Demonstrated experience with DFMEA, PFMEA methodologies, Fault Tree Analysis, Pareto analysis, root cause and corrective action</li><li>Proven ability to deliver new product implementation activities on time and to budget</li><li>Familiar with engineering change processes and implementation in production environments</li></ul> If the above is aligned and you would like to know more&nbsp;apply now, all applications are considered and reviewed.WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Manufacturing Engineer II - Avionics

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!Lead Manufacturing Engineer - PropulsionBased out of Rocket Lab's headquarters in Long Beach, CA the Lead Manufacturing Engineer - Propulsion is responsible for overseeing the introduction and implementation of new products and product revisions as related to both Rutherford and Archimedes engines. You will support the Director of Manufacturing Engineering and Production organization, with deliverables required for internal leadership, board of directors and investors.WHAT YOU’LL GET TO DO:<ul><li>Contribute to design reviews acting as an expert in design for manufacture, design for test, productivity, supplier capability assessments, quality control, etc.</li><li>Perform initial Value Stream Mapping Exercises, Method of Manufacture plans, cell design, etc.</li><li>Implement Factory layouts, Equipment selection, FAT, SAT, and production commissioning.</li><li>Develop production processes and ensure they are accurately and clearly documented, including testing procedures, health and safety requirements and supervisor signoffs.</li><li>Interface with the quality team to resolve manufacturing engineering quality responsibilities, and when required, lead problem containment and structured root cause &amp; corrective action investigations.</li><li>Design, develop, and implement tooling and equipment for use in a production environment where appropriate to improve quality, delivery and/or cost performance</li><li>Lead the continuous improvement process in your area using lean tools and techniques such as 5S</li><li>Introduce automation where appropriate and ensure equipment data links directly to MRP and quality systems</li><li>Lead a team of manufacturing engineers through development and production initiatives.</li></ul>YOU’LL BRING THESE QUALIFICATIONS:<ul><li>Bachelor Degree in Engineering (Preferably, Manufacturing, Mechanical, Electrical, or Aerospace)</li><li>5+ years of experience in a manufacturing environment</li><li>Understanding of fluid and structural mechanics fundamentals</li><li>Knowledge in manufacturing processes for aerospace materials</li><li>3+ years of experience in a leadership position.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Advanced engineering degree (Preferably, Manufacturing, Mechanical, Electrical, or Aerospace)</li><li>Strong knowledge of manufacturing processes common to fluid components</li><li>Experience with assembly &amp; testing of turbomachinery and combustion devices</li><li>Experience with designing, implementing, and supporting a production line and/or build area</li><li>Experience with manufacturing processes, including but not limited to TIG, EB and laser welding, heat treating, metal forming, additive manufacturing, CNC machining and precision cleaning</li><li>Experience transitioning products from design to production as a part of cross-functional team in a fast-paced, iterative design environment</li><li>Experience performing root cause and corrective action projects and PFMEA / DFMEA of manufacturing processes and products</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. &nbsp;&nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. &nbsp;</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise.&nbsp;</li><li>Availability to work long hours and weekends as needed based on test and launch schedules&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$95,000—$135,000 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Lead Manufacturing Engineer - Propulsion

Illinois Tool Works (ITW) is a Fortune 200 company that produces diversified products in global markets.&nbsp; Some of its products include welding equipment, automotive components, construction materials and commercial food equipment.&nbsp; The Food Equipment Group is one of seven ITW decentralized business segments.&nbsp; This position is in the Hobart Warewash Division at its Danville, Kentucky facility, located 45 minutes south of Lexington, Kentucky. This position reports directly to a Supervisor overseeing Fabrication responsibilities for the facility and is responsible for being self-directed in the day-to-day activities..&nbsp;The Warewash Business Division produces Hobart brand commercial dishwashers that are used in hotels, casinos, restaurants, cruise ships, schools, universities and retail establishments.&nbsp; We are the industry leader and are seeking to expand our growth in existing served markets as well as new markets.<h2>Job Description</h2><ul><li>Follows all company safety rules and policies.</li><li>Computer Numerical Controlled (CNC) machines</li><li>Various manual sheet metal formers ( i.e. tube benders, laser metal cutter, presses, grinders,&nbsp;spot welders &amp; stud welders)</li><li>Reads shop blueprint drawings for fabrication specifications and job safety analysis work instructions&nbsp;to determine various parts to fabrication/install/assembly or by instructions of&nbsp;supervisor.</li><li>Inspects products and processes while performing job duties to ensure all work done meets or exceeds standards of the company’s quality program.</li><li>Works cooperatively and congenially with co-workers to achieve cohesive and productive work processes and work environment.</li><li>Performs additional tasks as assigned by management or as the situation requires (i.e. assembly)</li><li>Daily inspection of fabrication&nbsp;PPE and equipment to ensure in good condition for safe operation before use. &nbsp;&nbsp;&nbsp;&nbsp;</li></ul><h2>Qualifications</h2><ul><li>High School Graduate or GED</li><li>Minimum of 1 - 3 years experience required in CNC Machining or metal fabrication and finishing.&nbsp;&nbsp;</li><li>Prefer one year of vocational school or certificate.</li><li>Prefer CNC setup and operation of equipment to include editing programs.</li><li>Prefer One year or more in an&nbsp;industrial/manufacturing environment</li><li>Ability to follow verbal and written instructions regarding techniques required for general assembly work.</li><li>Ability to grind and finish metal&nbsp;</li><li>Ability to read and understand simple blueprints.</li><li>Ability to use a variety of small hand tools, power tools, and fabrication&nbsp;equipment.</li><li>Skilled in the use of material gauges, calipers and micrometers</li><li>Possess basic mechanical aptitude and ability.</li><li>Ability to lift up to 35 pounds or knowledge of using lifts</li><li>Ability to communicate clearly with other co-workers to coordinate work requirements and/or&nbsp;type of assemblies required</li></ul><h2>Additional Information</h2>Benefits:Take this opportunity to join a successful and enthusiastic global team where you can make a significant impact immediately. You will enjoy a competitive salary and a generous benefits package that includes health, dental, life, LTD insurance, 401k (with company match), employee assistance, wellness and tuition reimbursement programs. ITW is an Equal Opportunity/Affirmative Action employer.&nbsp;All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status.Other:<ul><li>Primary responsibilities performed in Manufacturing and non-air-conditioned environment</li><li>PPE required: Steel toe shoes, eye protection, sleeves&nbsp;and gloves if required.</li><li>While performing the duties of this job, the employee is regularly required to sit or stand at work area; use hands and arms and walk frequently. The employee occasionally must lift and/or move up to 35 pounds.</li><li>First Shift Operation Monday - Fridays (currently: 6am to 2:30pm)</li><li>Limited overtime</li></ul>ITW is an equal&nbsp;opportunity&nbsp;employer.&nbsp;We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential.&nbsp;As&nbsp;an equal employment opportunity employer,&nbsp;ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship.&nbsp;All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.&nbsp;&nbsp;

26 Industrial work / Manufacturing Full Time Jobs